40G/100G Optical Transceivers
10G/25G Optical Transceivers
155M/622M/2.5G Optical Transceivers
100M/1G Optical Transceivers
FC 16G/32G Optical Transceivers
CWDM/DWDM Optical Transceivers
100M/1000M/1G/10G Coppers
Active Cable AOC
High Speed Cable DAC
Regular/MTP-MPO Fiber Patch Cords
MT2011
MT2010
CodingBox
Bdcom S3956M Switch Unboxing
Time: 2024-03-13
Moduletek Limited Labs has purchased a Bdcom S3956M switch to test the 1G/10G SFP product line, and the following takes you through the unboxing process.
Table 1 Equipment official description information
|
Item
|
Description
|
|
S3956M
|
24-port Gigabit Power + 24-port Gigabit Optical + 8-port 10 Gigabit Optical, Ethernet Routing Switch (1 Mini Usb type Console port, 24 Gigabit Power ports, 24 Gigabit/100 Gigabit Adaptive Optical ports, and 8 10Gb/100Gb adaptive optical ports; 2 power supply slots, standard with a hot-swappable power supply AC220V; fan cooling, 1U height, standard 19-inch rack mount)
|
Equipment out of the box contains a host, a box of accessories (a three-legged power cord, a MINI-USB to DB9 serial cable, screws and rack angle iron, plastic feet, warranty).
Figure 1 Bdcom S3956M packaging
Figure 2 Bdcom S3956M accessories
The front panel mainly has 24 RJ45 ports, 24 1G SFP interfaces, 1 MINI-USB serial port; the back panel mainly has 8 10G SFP interfaces, 2 external power access slots, one of which has been connected to the AC power module.
Figure 3 Bdcom S3956M front panel / back panel
Access the power cable to power up the device.
Figure 4 Powering up the Bdcom S3956M device
Use the MINI-USB to DB9 serial cable to connect the PC to the switch through the serial port; the default baud rate of the device: 9600, account/password: admin, log in to the console, execute the command "show version " to view the device model and system version information.
Figure 5 Enter the console to view system information
Use RJ45 twisted-pair cable to access the RJ45 port of the switch, use the browser to access the WEB management interface; default IP: 192.168.0.1 (configurable), account/password: admin.
Note: The switch supports the control of HTTP access, only when the HTTP service is turned on, there is HTTP protocol interaction between the switch and PC, when the HTTP service is turned off, the HTTP protocol interaction stops. Use the following command on the console to configure the switch for HTTP access.
Switch#configure terminal //Enter global configuration mode
Switch_config#ip http server //Enable HTTP service
Switch_config#ip http http-access enable //configure HTTP access mode
Switch_config#ip http ssl-access enable //configure HTTPS access mode
Figure 6 WEB Management Interface
Access the 10G SR optical module of Moduletek, the switch can recognize the module type correctly.
Figure 7 Switch recognizes the optical module
The optical module products of Moduletek Limited can be very compatible with Bdcom's related equipment, welcome to buy.
If you have any questions about the above content, you can contact us by Email : web@moduletek.com
If you have any questions about the above content, you can contact us by Email : web@moduletek.com
